Momentary LED Tactile Switch with 10mm round cap

CreateDate:2016/10/28 16:32:50       view:
Introduction

Momentary LED Tactile Switch with 10mm round capTS8-3W4GX

Specification:

Rating:50mA 12VDC

Circuit:SPST

Insulation Resistance:100MΩ Min (at 500 VDC)

Dielectric Resistance:AC 250V (50/60 Hz for 1 minute)

Contact Resistance:100mΩ Max. (Initial)

Electrically Life:300,000 Cycles Min

Ambient Temperature:-25°C~ +70°C

Operating Force:160 ± 50gf

Button shape:round

Switch size:6x6x7mm

Button size:10mm

Manufacturer series:TS8

Momentary type:push it- on, release it - off

Features
- Contact Reliability Clip type contacts are applied to ensure high reliability.
- For PC Board Terminals are all IC pitched (multiple of 2.54mm).
- By a particular terminal shape,the switch tightly when solder-dipped.
- Protection from Flux Entry Terminals are all completely sealed byepoxy.
- Many LED lights are available.

 

Dongguan Fvwin Electronics Co.,Ltd

Manufacture the illuminated tactile switch,led illuminated push button switch,rocker switch,slide switch

more detail please click  http://www.fvwindz.com        Email:fvwin@fvwin.com


Pre:This is the first article
Next:This is the last one
More Prodcuts